1,000 Foot Roll or Custom Cut 100 Foot Roll of Spot Spitter Tubing.  Inside Diameter 3.18mm   Outside Diameter  4.75 mm
No Adapter or Glue Needed when using this tubing with a Spot Spitter!
How do I use this tubing ?
- Use 1/4″ punch (Miracle Punch or Punch 250) to make hole in lateral line (typically 1/2-inch or 3/4-inch Poly tubing mainline).
- Cut the length of tubing you need
- Push one end onto the stake.  Cut the other end at an angle.
- Insert angled end of tubing into the Lateral Line.
- Push until the angled end penetrates to about 1/3 the diameter of the hole.
- That’s it! No joiners needed for this setup.
Use with Down Spray or Standard Spot Spitters by Primerus Products.
