Vibro Sprinkler / Mister Heads Only for Bench Watering (Add Base Assembly)

Choose the SpinNet or VibroNet Sprinkler and Check Valve Head Assembly for your application. All sprinkler solutions are based on an average sprinkler working pressure of 30 psi and spacing between the sprinklers of three feet. Check Valve with purple pin opens at 28 psi.

DURABILITY AND LOW MAINTENANCE

All sprinklers are made from the highest quality plastics with excellent Ultra-Violet (UV) resistance. These anti-acid plastics will not crack when exposed to normal greenhouse pesticides and fertilizers resulting in a longer life with fewer maintenance issues. All parts can be assembled and disassembled in the greenhouse without tools.

DRIP-LESS SPRINKLERS

Our sprinklers are constructed without a "bridge" to retain the spinner, producing a drip-less operation. This means that plants located below the sprinklers are not damaged from water dripping off the sprinkler. Sprinklers hang below the supply pipe preventing wetting of the pipe and dripping onto the plants below.

WIDER PATTERNS UP TO 24'

Since the SpinNet Sprinklers produce a wider pattern (up to 24'), a single line can be used where two were once necessary - saving the grower money and installation time. Higher levels of uniformity and efficiency are possible with single line solutions.

RELIABLE CHECK VALVES

Assembled above the sprinkler head is a check valve. This check valve ensures that each sprinkler turns on and off at exactly the same time. It prevents water from draining onto the plants or cuttings below after system shut down.

VALUABLE PRODUCTION TOOL

Automating with Netafim Sprinklers instead of hand watering bedding plants, seedlings, and potted perennials reduces labor costs, improves efficiency and plant quality.

SPINNET OR VIBRONET SPRINKLER WITH CHECK VALVE

• SpinNet Sprinklers are available in two flows and six sprinkler options.
• They consist of a Mist Control, Body, and Spinner. The Mist Control determines the flow rate and eliminates misting that distorts the sprinkler pattern. The Spinner determines the radius which allows the sprinkler to handle bay width applications from 10' to 38'.
• Check valve provides instantaneous on-off and prevents line drainage. 
  It opens at 28 psi and closes at 13 psi.

HANGING ASSEMBLY WITH STABILIZER WEIGHT

• Super Flex UV White™ 4/7mm Polyethylene tubing made from the highest quality plastics with excellent UV resistance. Our reflective white tubing is completely opaque to prevent algae growth. This tubing is not coated or layered white, it is solid white for long-term durability. It withstands heat, direct sun, harsh chemicals and produces cooler water temperatures enhancing plant growth.
• Barbed end for insertion into the Polyethylene Tubing Supply Line and a female connecter on the other end to attach the Check Valve and Sprinkler Unit.
• Stabilizer weight keeps the sprinkler plumb.

OPTIONAL COMPONENTS

• Retrofit Adapter is used to connect Netafim SpinNet or VibroNet Sprinklers to other manufacturer’s fittings and it attaches above the check valve.
• For connection to rigid pipe with ½” threaded connection, use the ½” Adapter.

Step 3

SELECT THE SPRINKLER BASE

Netafim offers a selection of three bases to connect the sprinkler to the supply line.

• ½” Adapter – used for connection to rigid pipe
• Retrofit Adapter – connects Netafim sprinklers to other manufacturer’s fittings
• Hanging Sprinkler Assembly – choose length based on your application (see available options under the Ordering Tab). An extension tubing piece for creating longer lengths is optional. The Hanging Assembly connects to the Polyethylene (PE) Tubing Supply Line and the SpinNet or VibroNet Sprinkler Head and Check Valve.

Step 4

SIZE THE SPRINKLER SUPPLY PIPE

Use the chart below to select the correct sprinkler supply size. Low density polyethylene is strongly recommended. Netafim also offers 3/4" or 1" polyethylene tubing with pre-punched holes at 36" spacings.