The 710AP DIG Propagation Mist Controller
The 1″ Mister includes a seven-button keypad, a large, easy-to-read LCD display, intuitive icon-based programming with five start times per day in weekly or cyclical mode, manual run, monthly budgeting, and rain off with restart of up to 99 days. The controller also features a propagation mode including cyclical frequencies from 1 minute to 59 minutes or from 1 to 12 hours, and duration in seconds for loop watering with selectable start and stop times.
3 Year warranty and low battery indicator give you piece of mind!
HOW IT WORKS
- Semi-automatic and manual operation with timed countdown for shutoff.
- System On/Off button allows the user to turn off the controllers programming and reactivate it as desired as well as to quickly activate or deactivate a propagation program outside of its set start and stop times when used in propagation mode.
- Propagation mode features error catching so that programming mistakes cannot be entered and will automatically update to an allowable entry (run time greater than interval or interval less than run time).
FEATURES:
- Low battery indicator
- Display indicates if irrigation is set to water for the day and if any of the additional programming features are active.
- Simple, icon-based intuitive programming and EasyFlow navigation.
- After 15 minutes the controller the screen will turn off automatically to conserve energy.
- Brackets for solenoid and wall mounting options are included.
- Reset option helps you erase all programs to default settings except date and time.
- Non-volatile memory holds programs indefinitely without batteries except date and time.
- Rain sensor connection included. Normally closed 6″ (15 cm) AWM 1007 / 1569 16 AWG 300V VW-1-yellow wire.
- Can be mounted on a range of solenoid valves -includes Dig adapters.
- Captured solenoid plunger and spring for easy maintenance.
SPECIFICATIONS:
- Controller type: DC
- Power source: two AA alkaline batteries (not included)
- Controller power input: constant 11 volt.
- Seven keypad buttons with integrated liquid crystal display.
- Temperature range: 38F to +130F (3C to +54C)
- Latching Solenoid: 7-12 VDC, two-way, normally closed.
- Solenoid control orifice: .065 (1.65 mm)
- Encapsulated solenoid thread: 11/16″-12 UN male thread.
- Retractable solenoid wire: 8.1 (coiled length when extended, approximately 36″)
- Completely waterproof (IP68 certified) – can operate in harsh environments
- Mounting options: solenoid or valve box mounting.
- RoHS compliant
MATERIALS:
- Controller housing high-impact plastic.
- Solenoid housing: glass reinforced nylon.
- Plunger & spacer: 430F stainless steel.
- Plunger rubber cap: EPDM
