CoolNet Foggers are the best propagation nozzles. They create a zone of saturated humidity that is ideal for rooting.

FOR MORE DETAIL AND DESIGN HELP, FIND THE BROCHURE LINK IN TABS.

• LOWER COST – Our CoolNet Foggers are affordably priced – much less than high pressure fog systems.
•  HIGHLY UNIFORM APPLICATION With an operating pressure range of 45 to 60 psi, these foggers produce an average droplet size of 90 microns (at 60 psi) each and every time. This creates a “blanket of fog” or zone of saturated humidity ideal for rooting. Each nozzle of the 4-Way Fogger has a flow rate of 2.0 GPH.
•  An average particle size of 65 microns at 60 psi, results in quicker evaporation and higher humidity rates. 
•  DEPENDABLE OPERATION Since the CoolNet Fogger operates on low pressure, there is significantly less wear on the fogger components resulting in less maintenance and reduces overall operating costs. Our fogger system requires 140 mesh filtration eliminating costly filtration systems with intensive maintenance issues.
•  SIMPLE INSTALLATION AND DISASSEMBLY! Fogger blockers are available to close off one or more nozzles of the assembly when needed.

CoolNet Foggers are readily adaptable to existing systems. They are easy to install with fittings common to most hanging assemblies. All it takes is a “twist” and the fogger nozzle can be removed from the center assembly – no tools needed.

RELIABLE CHECK VALVES!  Assembled above the CoolNet Fogger Head, is a high-pressure check valve. This check valve ensures that each fogger turns on and off at exactly the same time for effective short cycling. It also prevents water from draining onto the plants or cuttings below after system shut down.